jktl valve,ball valve

Follow us

Call Today!

Concentric win the future with the force

+86 317 8338351
Detailed analysis of Q61F-25 steel welded ball valve
product description:
Steel welded ball valves have been used extensively in various fields in recent years. With steel welded ball valve's quality and stability, in various fields has been widely used, has been fully affirmed and recognized. Steel welding ball valve life is much greater than steel butterfly valve, ordinary welding ball valve;

Steel welding ball valve Applications: urban gas, urban heating, petrochemical, ship-building, steel, regulating stations, power plants and other types of pipeline equipment. Full welding ball valve can be used for long-term reliable operation, no maintenance, simple operation, the valve installation is more convenient, saving the project time and reduce the project cost. Steel welded ball valve its service life and pipeline life.

Valve Type: Q61F
Connection: welding, butt welding

Steel welding ball valve technical characteristics:
1, Overall structure of the valve body welding, there will be no external leakage.
2, The seat by the PTFE seal ring and spring composition of the pressure and temperature changes to adapt to the use of the range will not produce any leakage.
3, The stem of the anti-leakage structure, the bottom of the stem has a PTFE self-sealing gasket and an O-ring, above the two O-ring, two PTFE gasket composition to ensure that no leakage.
4, Valve material and pipe material the same, there will be no stress uneven, nor will the earthquake and the vehicle through the ground when the extrusion deformation.
5, Valve body is light and easy to heat.
6, Buried ball valve can be buried directly in the ground, do not build a high valve wells, just set the ground shallow wells, greatly saving construction costs and engineering time.
7, According to the pipeline construction and design requirements to adjust the length of the valve body and stem height.
8, The precision of the ball processing is very precise operation of light, no bad interference.

Steel welding ball valve installation Note:
Valve shaft masonry.
Welded ball valve with a special structural design, with maintenance-free features, buried in front of the valve coated Pu special anti-corrosion coating, while the three were valve seat and stem injection tube, The pipe and stem are properly extended according to the depth of the depth so that the staff can complete the operation on the ground. To achieve a direct buried, the masonry small valve hand can be.
The following are the same as the "
The valve should be lifted in the correct way. To protect the stem, do not connect the chain to the handwheel, gearbox or actuator. The protective cap at both ends of the valve sleeve should not be removed before welding.
The following are the same as the "
The welding ball valve is connected to the trunk line to be welded. When ordering the valve, the manufacturer should be required to add 1.0m long sleeves at both ends of the valve. Once the weld is defective, there will be enough length to cut the unqualified weld and re-weld the ball valve and pipe. The valve should be in 100% Position, so as to avoid the ball is splashing the welding slag damage, while ensuring that the valve internal seal temperature does not exceed 140 degrees Celsius, if necessary, can take appropriate cooling measures.